Nikon XTH 225工业CT的特点和优势
Nikon XTH 225工业CT的广泛应用范围和特点优势
入门型XT H 160 和通用型工业CT XT H 225 无损检测系统系统，提供了大电压以及微焦点尺寸，高清晰度和分辨率的扫描效果，非常适合CT三维图形重构。应用范围从塑料部件检测、小型铸件、复杂结构件、材料研究、故障失效分析和自然科学研究等等。
XTH225系统的优势
25-225kV micro-focus source with 3um focal spot size
25-225kV 微焦点源，焦斑大小为3μm
Low cost maintenance open tube technology
低成本维护开管技术
5-axis fully programmable manipulator
五轴完全可编程操纵器
Choice of high resolution digital detector
精选高分辨率数字探测器
Intuitive joystick navigation drives real-time X-ray image generation
直观的操纵杆导航可指导生成实时X射线图像
Measurement volume of 25X60cm
测量体积 25X60cm
Safety as a design criterion
防辐射安全装置作为设计标准
Compact design and low weight facilitates installation
结构紧凑设计，轻质容易安装
Ergonomic loading of sample
符合人体工学的样品装载
Applications主要应用
Fault detection and failure analysis
内部缺陷检测和失效分析
Assembly inspection of complex mechanisms
复杂结构件的装配检测
Dimensional measurement of internal components
工件内部结构的三维尺寸测量
Part-to-CAD comparison
工件与CAD数模进行比对
Advanced material research
高端材料分析研究
Analysis of the biological structures
生物体结构分析
Digital archiving of models
模型的数字化保存
.jpg)
• 实时的X射线可视化，迅速的CT 数据重构
• 完全可编程化的5轴操作样品台
• 可自定义宏让检测工作流程自动化
| Microfocus source | Max. kV | Max. power | Focal spot size | Focal spot size | XT H 160 | XT H 225 |
|---|---|---|---|---|---|---|
| 160 kV Reflection target | 160 kV | 225 W | 3 µm up to 7 W | 225 µm at 225 W |  | |
| 180 kV Transmission target | 180 kV | 20 W | 1 µm up to 3 W | 10 µm at 10 W | | |
| 225 kV Reflection target | 225 kV | 225 W | 3 µm up to 7 W | 225 µm at 225 W |  |
| Detectors | # Bits | Active pixels | Pixel Size | Max. frame rate at 1x1 binning | Max. frame rate at 2x2 binning | XT H 160 | XT H 225 |
|---|---|---|---|---|---|---|---|
| Varian 1313Dx | 16-bit | 1000 x 1000 | 127 µm | 30 fps | 60 fps | | |
| Varian 2520Dx | 16-bit | 1900 x 1500 | 127 µm | 12.5 fps | 30 fps | | |
| Varian 4030 | 14-bit | 2300 x 3200 | 127 µm | 3 fps | 7 fps | | |
| Perkin Elmer 0820 | 16-bit | 1000 x 1000 | 200 µm | 7.5 fps | 15 fps | | |
: Basic configuration
: Alternative configuration
| Manipulator | XT H 160/ XT H 225 |
|---|---|
| # Axes | 5 |
Axes travel (Typical values - Exact values depend on system configuration) | (X) 185 mm (Y) 250 mm (Z) 625 mm (Tilt) +/- 30 (Rotate) n*360° |
| Max. sample weight | 15 kg |
| General | |
|---|---|
| Cabinet dimensions (LxWxH) | 1,830 mm x 875 mm x 1,987 mm |
| Weight | 2,400 kg |
| Safety | All systems are manufactured to IRR99 |
| Control software | All systems are controlled by Nikon Metrology’s in-house Inspect-X software |
![微信客服](javascript: Mobi.showWeChatService("//13214956.s21i.faiusr.com/2/ABUIABACGAAg74u34AUogOrr8QEwrgM4rgM.jpg");){kind=link}